Overview
Successful paintball teams and players have been sizing their barrels to match their paint size for a number of years. By obtaining a correct paint to barrel match a player will not only add accuracy but also efficiency. The biggest obstacle with bore sizing paint is that balls are being manufactured progressively smaller and the bore sizes DO NOT EXIST. Because of these issues, TechT developed the iFIT Precision Barrel Boring Kit.
Over the past decade, players have found that correctly boring their paintballs leads to increases in both accuracy and efficiency. Two issues have arisen concerning the ability to properly bore paint. First off, paintball boring systems that have previously been available are expensive due to the fact that they consist of multiple backs, tips, and inserts. Prices for these kits can easily cost hundreds of dollars. The typical barrel system or kit becomes very expensive when adding multiple threads and or bore sizes... not the case with the iFit Kit. Another problem players are encountering is that paintballs have become progressively smaller over the last few years. The bore sizes needed to size this smaller paint have simply not even been available...until now. The iFit Kit offers the most comprehensive selection of bore sizes and threads to date, while still being the most economical option.
TechT found that by adding only 1.75 inches of compression length to the majority of barrels and barrel systems via the iFit Kit can obtain significant increases in accuracy and efficiency. What does this mean for you? It means that with nothing more than the barrels you already have in your gear bag, you can start sizing your paintballs correctly and obtaining those increases. It works with any barrel on any gun. The iFit Kit allows for optimal compression of any paintball to maximize the potential gains from your barrel. It makes any barrel - every bore!
TechT's 6 Piece iFIT Kit comes with the barrel thread of your choice as well as the following 6 inserts:
- .685
- .682
- .679
- .676
- .673
- .670
TechT 6 Piece iFIT Precision Barrel Boring Kit
TechT's 6 Piece iFIT Kit comes with the barrel thread of your choice as well as the following 6 inserts; .685 .682 .679 .676 .673 .670
By obtaining a correct paint to barrel match a player will not only add accuracy but also efficiency. The biggest obstacle with bore sizing paint is that balls are being manufactured progressively smaller and the bore sizes DO NOT EXIST. Because of these issues, we present the new iFIT Precision Barrel Boring Kit
iFIT is here to make paintball bore sizing possible again!
We have all been conditioned to believe that using a 4-6 inch bore insert is the only way to successfully get the maximum benefits of sizing your barrel to your paint. Testing however has shown differently. We have found that only 1.75 inches is needed in order to obtain maximum results. We have found that after the first 1.75 inches, the paintball stops accelerating and the added length only adds drag and the potential barrel breaks. What does this mean for you? It means that with nothing more than the barrels you already have laying in your gear bag, you can start sizing your barrel to your paintballs correctly. The iFIT Kit works with the barrels you all ready have. It works with any barrel, on any gun. The iFit becomes your new back, and any one-piece or two-piece (stepped bore) barrel becomes your tip. It makes any barrel into the perfect match for your paint.
iFIT is a totally modular system that accommodates all the paintballs and re-balls that are being sold today. After buying several brands and grades of paintballs, and sizing them all, we have found that many paintball manufactures have started manufacturing paint smaller than .679 (smallest industry standard available). In many cases this change to a smaller bore paintball means that your current set of barrels is too big for the paint you are forced to buy. Using a barrel that is too big means that you will have less accuracy, less efficency, and be more apt to break paint in your barrel.
Rather than having to buy several expensive full barrel backs, complete barrels of various bores, or trying to find barrel inserts that don't exist, one can save yourself time and money with the iFIT. No other manufactures offer the range in bore sizes that we do. The iFIT Kit ranges in size from .692 down to .667. This is the largest range in bore sizes you will find from any manufacture. iFIT also will save you money by only having one adapter per marker thread as oppose to purchasing several backs with individual bore sizes. Simply put, the iFIT Kit is the most comprehensive kit available today.
The iFIT comes in 2 different configurations, a 6 piece insert kit as well as a 9 piece insert kit. Kits will come with the thread of your choice. Additional backs and a "filler kit" are available for converting a 6 piece into a 9 piece kit. Currently our adapter bodies come in the following threads: Autococker, A5/X7, Ion/Smart Parts, Model 98, Spyder, A5 to Hammerhead, & Autococker to Hammerhead.
Categories
New Products 
Product Details
